Important considerations when choosing CAP 7-Foot Olympic Bar
CONSTRUCTION Made with high-quality solid cold rolled Japanese steel and black phosphate finish For use with Olympic plates with 2-inch center hole No center knurl. SPECS 132,000 PSI tensile strength steel Bar length is 2185mm 15 loadable sleeve length Weighs 20KG 44LB 28.5mm handgrip diameter 51.5-inch shaft length between sleeves . 5 Year Warranty*. FEATURES Medium depth diamond knurling for non-slip, tight grip No center knurling Rotating sleeves with bushings to reduce pressure on wrists and forearms Powder coat finish to prevent oxidation rust. VERSATILE Get a full body workout or target specific muscle groups to build mass and strength. TRUST Trust experience. CAP has been a pioneer in fitness for over 30 years and has locations worldwide Chances are, if you have ever worked out before you have used a CAP product
What is the advantage of this CAP 7-Foot Olympic Bar?
We offer a variety of specialty bars for Olympic and Power Lifting. No matter what your needs are for weightlifting, we have a bar that will suit your needs These bars are crafted with high-quality materials and finished in durable coatings to provide a long-lasting barbell that offers exceptional performance. Made to accommodate weight plates with a 2-inch center hole, also known as Olympic Weights.
The Beast Olympic Bar by CAP Barbell measures 2185mm in length and is designed to take on super heavy workloads and is a top choice for professional weightlifters and club owners. Precision engineered for balance and long-lasting performance, this bar features 110,000 PSI tensile strength cold rolled Japanese steel. The medium-depth diamond knurled handgrips are 30mm in diameter and are designed for a tight, non-slip grip when lifting. The sleeves with bushings are designed to swivel to reduce pressure on the wrists and forearms and have a 15-inch loadable sleeve length, providing ample room to load your weights with 2-inch center hole . The shaft length between the sleeves is 51.5-inches in length and will fit on Olympic benches and racks cages. Designed with no center knurl, this bar is ideal for Olympic weightlifters that are perfecting their squats, deadlifts, and bench presses.
The CAP Barbell The Boss Silver Zinc Weight Lifting Olympic Bar measures 2185 mm in length and is constructed from high-quality solid cold rolled Japanese steel with a durable bright silver zinc finish or black phosphate finish for a long-lasting, high-performance bar that can handle the most grueling workouts. Constructed with 132,000 PSI tensile strength steel, a weight of 20 kilograms, and a 28.5 mm handgrip diameter, this bar is made for performing snatches and clean and jerks. This bar is a top pick for Olympic lifters and commercial gyms. The Boss is available in THREE styles. If you are a power lifter, then The Boss with a center knurl is the right fit, whereas The Boss without a center knurl is ideal for Olympic lifters.
The Rebel Olympic Bar from CAP is the top choice for home gyms, commercial gyms, club owners, and powerlifters. Designed a comfortable center knurl, and medium-depth diamond knurling, this bar is ideal for squats, bench presses, and deadlifts. The 190,000 PSI tensile strength steel combined with the rotating sleeves with bushings makes this bar a durable, long-lasting, high-performing barbell that also helps reduce the pressure in the wrists and forearms when going heavy. The 15-inch loadable sleeve length allows ample room to fit Olympic weight plates and bumper plates. Weighing in at 20KG 44LB with a 28.5mm handgrip diameter, this barbell meets the specifications for Olympic weightlifting training. The length of this bar is 2185mm.
The CAP Barbell needle bearing bar is designed to take on super heavy workloads and is the top choice for professional weightlifters and club owners. If you re looking for the best, this is it. Precision engineered for balance and long-lasting performance with a 190,000 PSI tensile strength steel, this bar is perfect for Olympic Power lifting Cross training. The 5 needle bearings in each sleeve, allows it to swivel at the most delicate touch, prohibiting the bar from warping and reduces pressure on the wrists and forearms. The zinc finish prevents the bar from oxidizing requires less maintenance than bars coated in chrome or black oxide. This bar features a 28mm shaft diameter with 120mm of center knurling and knurling on the sides The sleeves have a 16 loadable sleeve length to allow plenty of room for your bumper plates or Olympic plates to fit.
The CAP Barbell Warrior Bar is designed to take on super heavy loads for Olympic lifting, powerlifting, and cross training. This bar is a top choice for professional weightlifters and club owners. If you re looking for a serious Olympic barbell, this is it. Made with high-quality cold rolled solid steel for durable, long-lasting performance and a hard chrome finish prevent the bar from oxidizing. The Warrior bar features 230,000 PSI tensile strength steel and easily handles extreme weight. 2 x 10 pin needle bearings and 2 over-sized oil-impregnated bushings provide an extremely smooth spin and prevent the bar from warping. The 16.35 loadable sleeve length allows ample room to fit Olympic weights or Olympic Bumper weights when going heavy. This bar weighs 20KG standard 44 LB and has the shaft diameter of 28mm. This Olympic barbell will fight by your side day in and day out and will muscle through the most grueling workouts.
The sleeves are designed with bushings for a smooth spin. This prevents the bar from warping and reduces pressure on the wrists and forearms when going heavy. Each Olympic bar features ample loadable sleeve length to load your Olympic weights.
Every bar has medium-depth diamond knurling to offer a secure, tight non-slip grip when lifting, so there s no need to worry about the bar slipping out of your hands while exercising.
The durable coating on each bar helps to prevent the bar from rusting and requires less maintenance.
This barbell was great when I purchased it 5 months ago, but, now, whenever I touch the threaded ends where the plates go on, my hand is covered in metal shaving splinters. The finish is sharp when it chips, and I ve included a photo of some splinters that I couldn t get out of my fingertips after the last workout--imagine your hand covered in them I don t have an issue with them otherwise, but I wish I knew about this or I would have gladly paid more for a barbell that s part cactus Scroll through the reviews for another person who has the same issue--it is definitely not isolated